Kitchen Cabinets Built to Your Room, Not to a Catalog Size
Every door, drawer front, and panel is fabricated in our own shop from high-quality plywood and hardwood — nothing ordered from overseas, nothing forced to fit a stock size. Odd walls, sloped ceilings, a range wall that is 3½ inches off square: that is normal work for us. Measurement, drawings, fabrication, delivery, and installation are all handled by our own team, with a dedicated specialist at each step.
One Shop, One Set of Drawings, One Crew on Site
A custom kitchen is not a box order with filler strips hiding the gaps. We start with a jobsite meeting and real measurements, put the layout into drawings you can check before anything is cut, and then fabricate the whole kitchen — boxes, doors, drawer fronts, panels, islands, tall pantry towers, range alcoves — in our own shop here in Chattanooga.
That is where the material question matters. We build with high-quality plywood and hardwood rather than cheap particle board, because a kitchen that gets opened and closed a few thousand times a year has to hold its edges and its alignment. Ask any cabinet maker what the box is made of and what the hardwood is — it is the single fastest way to tell two bids apart.
From approved estimate to fabrication, delivery, and installation typically runs two to three weeks. Because we are doing all of it, the finish on your island matches the finish on your vanity cabinetry and your closet build if you want the whole house to read as one piece of work.
Get My Free Estimate
100% Custom Fabrication, and Materials You Can Inspect
Two things decide whether a kitchen still looks right in ten years: what the cabinets are actually made of, and whether they were built for your room or trimmed to fit it. We are set up for both.
High-Quality Plywood and Real Hardwood
We build cabinet boxes from high-quality plywood, not cheap particle board that swells the first time a dishwasher leaks. Doors, drawer fronts and decorative work — fluted island panels, reeded glass frames, walnut tall units — are made from hardwood, and the finishing happens in our shop so the color is consistent across every run.
Pay for quality and it lasts a great deal longer. That is the advice we give anyone hiring in this trade: confirm the company is insured, ask exactly what material the boxes and fronts are, and ask about the warranty before you sign. You are also welcome to come to the shop and look at the quality of the furniture yourself.
Every kitchen carries a minimum one-year workmanship warranty, with three to four years on manufacturer components. More on that in the questions we get asked most.
Odd Dimensions Are Not a Problem Here
Because we fabricate everything ourselves, there is no stock size to work around. Curved island ends, a fluted apron, a plastered range alcove with recessed niches either side, a pantry tower scribed tight to a ceiling that is not level — those get drawn, cut, and finished to your measurements rather than approximated with fillers.
That also covers the parts of a kitchen people forget to ask about: a butler's pantry with full-height storage and floating shelves, a panel run that hides the built-in refrigerator, an island with open display shelving on one end. If you want to see how these come together in finished rooms, the kitchen photos are worth a scroll.
From First Call to Installed Kitchen
Five steps, and after the estimate is approved the whole build usually runs two to three weeks.
1. You Call or Text
Tell us where the kitchen is, roughly what you are planning, and whether it is a remodel or new construction. Call or text (423) 463-8472.
2. Jobsite Meeting
We come out, look at the space, talk through layout, materials, and hardware, and take the information we need to draw it.
3. Measurements and Drawings
A specialist measures the room properly, then we produce drawings of the kitchen and send over your estimate to review.
4. Fabrication in Our Shop
Once the estimate is approved, the boxes, doors, drawer fronts, and panels are built and finished by our own shop team.
5. Delivery and Installation
Our installers deliver and fit the kitchen, scribe the runs, hang the doors, and set the hardware, then walk the finished job with you.
What the Cheapest Cabinet Quote Usually Leaves Out
There is always a lower number. Often it is a thinner box, an imported door, and a warranty that covers nothing you would ever actually claim on. Here is what is included when we build your kitchen.
- High-quality plywood boxes and real hardwood fronts — no cheap particle board
- Completely custom fabrication in our own shop, so odd sizes cost you no extra grief
- Nothing ordered from overseas — we control the schedule and the finish
- Drawings and a written estimate to approve before a single panel is cut
- Minimum one-year workmanship warranty, with three to four years on manufacturer components
- 16 years of experience in the cabinet trade behind every drawing and every install
- Measurement, fabrication, delivery, and installation handled by our own team, with a dedicated specialist for each step
What Homeowners Ask Us Most
From the moment you approve the estimate, plan on two to three weeks to cover fabrication, delivery, and installation. The jobsite meeting, measurements, and drawings happen before that, so the sooner we get out to look at the room, the sooner the clock starts.
High-quality plywood for the boxes and hardwood for the doors, drawer fronts, and decorative panels. We do not build with cheap particle board, and we do not order finished cabinets from overseas — everything is fabricated and finished in our own shop.
Yes. We are a 100% custom shop, so odd sizes are completely fine. Sloped ceilings, out-of-square corners, a narrow gap that a stock cabinet cannot fill — those get built to the measurement instead of covered with filler strips.
A free estimate is fine. Measurements and inspection are a separate matter and handled case by case — if you can provide accurate measurements and information, we can quote from that. If we need to come out and measure the space ourselves, there is a charge for that visit. Call or text (423) 463-8472 and we will tell you which applies to your project.
A minimum of one year on our workmanship, and three to four years on manufacturer components such as hardware and related fittings. Always ask a cabinet maker about warranties before you sign anything — and ask to visit the shop and see the quality of the work for yourself.
No. The same shop builds bathroom vanities, closet and garage storage, outdoor kitchen cabinetry, and commercial casework for hotels, offices, hospitals, and apartments. We also fabricate and sell to contractors.
Our shop is at 3806 Calhoon Ave, Chattanooga, TN 37407, and we install across the Chattanooga area as well as Knoxville, Nashville, and Atlanta.
One Jobsite Meeting, One Set of Drawings, One Custom Kitchen
Schedule My Estimate Call or TextMost kitchens go from approved estimate to installed in two to three weeks. Book the jobsite meeting now to get on the fabrication schedule.
Jobsite Meeting → Drawings and Estimate → Fabrication, Delivery, and Installation